- Seller Index
-
5
Rating:
-
Product quality
5 Stars Flat---- -
Service
5 Stars Flat---- -
On-time shipment
5 Stars Flat----
- Company Name:
- YOUTUO
- Location:
- Telephone:
- 0533-6889033
- Business license:
Help
Best seller
Favorites
- Brands:
Machine features:
♦ UHD cameras with less than 10 million effective pixels are used. Realize high precision short focus imaging. Compact and practical appearance
♦ The effective working width of the previous product is several times higher than that of the previous product under the premise of maintaining the same accuracy
♦ Single ultra large direction imaging is used. To avoid the error of Mosaic image and image quality is reduced.
♦ Multi-template feature point positioning Z-cut.
♦ Finding edge cutting to solve the problem of material deformation & extension. Save material,
Bulb Cutting and Quest Bulb Bullet Gauge Expansion Feed Cutting, Identification and Cutting
♦ All the objects found out by the wheel surface directly display the corresponding map, which can be convenient and intuitive to judge the accuracy
♦ Better human-computer interaction. For the one-time search file, can be separately partial or overall modification and reprocessing,
Precautions
1.During the operation of the machine, the operator is strictly prohibited to leave to avoid fire.
2.After each startup, check whether the submersible pump is out of water. It is strictly forbidden to start working without the pump.
3.It is strictly forbidden to start the machine without grounding. The ground wire of the laser power supply must be connected to the ground, and must not be connected to doors, windows, water pipes and other facilities. The ground wire should be connected to the outdoor ground.
4.The water temperature of the water container must be controlled below 25 degrees. If the water temperature is too high, the circulating water should be replaced. It is best to use purified water for circulating water, and ensure that the water is clean and free of impurities. Replace the circulating water regularly.
5.Due to the laser and high voltage parts inside the machine, non-professionals are strictly prohibited from disassembling machine parts without authorization.
6.The fan must be turned on when engraving to avoid contaminating the lens and focusing lens. It is strictly prohibited to place flammable and explosive materials near the equipment to avoid fire.
7.It is strictly prohibited to use during thunderstorms.
8.It is strictly forbidden to plug or unplug the power cord and communication cable when the power is on.
9.During operation, abnormal phenomena such as no light output or collision of the coordinate system are found, and the power supply should be cut off first, and then the machine should be turned on after troubleshooting.
10.The guide rails should be cleaned regularly.
Customer Reviews
100%Positive
0 CountCustomer Reviews